⚡ Cu ρ (75°C): 0.0214 Ω·mm²/m 🔌 NEC / IEC Standards: NFPA 70 & IEC 60364 🇺🇸 US Grid Avg: $0.175/kWh 🇩🇪 DE Grid Avg: €0.345/kWh 🇸🇪 SE Elpris: 1.54 SEK/kWh 🇳🇴 NO Strøm: 1.17 NOK/kWh 🔩 Copper Ref: $9,650/t (2026-10-25)
🏭 Industrial Electrical Conversion · Three-Phase & Single-Phase

325 kVA to Amps at 120V Single-Phase AC

Exact current (Amps), real power (kW), apparent power (kVA), mechanical horsepower (HP), breaker rating, and conductor size for 325 kVA on a 120V Single-Phase AC circuit.

Line Current (0.85 PF)2708.33 AAt 1.0 PF: 2708.33 A
Active / Apparent Power276.25 kW325.0 kVA · 171.2 kVAR
Recommended Breaker3400 A (NEC)2800 A (IEC Nominal)
Recommended Copper Wire5× 1000 kcmil (Parallel)IEC Metric: 5× 400 mm²

Engineering Breakdown for 325 kVA at 120V

Input Rating325 kVA (120V Single-Phase AC)
Amperage at 0.85 Power Factor (Industrial Motor/Transformer)2708.33 Amps
Amperage at 1.00 Power Factor (Resistive Load)2708.33 Amps
Real Power (kW / Watts)276.25 kW (276,250 W)
Apparent Power (kVA) & Reactive Power (kVAR)325.0 kVA / 171.2 kVAR
Equivalent Mechanical Horsepower (HP)370.46 HP
NEC 125% Continuous Circuit Breaker3400 A
Minimum Copper Conductor (100 ft / 30 m, ≤3% Drop)5× 1000 kcmil (Parallel) (NEC) / 5× 400 mm² (IEC)

Frequently Asked Questions

How many amps is 325 kVA at 120V (1-Phase)?

At 120V Single-Phase AC, 325 kVA equals 2708.33 Amps at an industrial power factor of 0.85 (or 2708.33 Amps at unity power factor 1.0).

What size breaker and wire is needed for 325 kVA at 120V?

For 2708.33A continuous load, NEC requires a 125% rated breaker of 3400A with 5× 1000 kcmil (Parallel) copper conductors, while IEC standard sizing uses a 2800A breaker with 5× 400 mm² copper cable.