⚡ Cu ρ (75°C): 0.0214 Ω·mm²/m 🔌 NEC / IEC Standards: NFPA 70 & IEC 60364 🇺🇸 US Grid Avg: $0.175/kWh 🇩🇪 DE Grid Avg: €0.345/kWh 🇸🇪 SE Elpris: 1.54 SEK/kWh 🇳🇴 NO Strøm: 1.17 NOK/kWh 🔩 Copper Ref: $9,650/t (2026-10-25)
🏭 Industrial Electrical Conversion · Three-Phase & Single-Phase

850 kVA to Amps at 120V Single-Phase AC

Exact current (Amps), real power (kW), apparent power (kVA), mechanical horsepower (HP), breaker rating, and conductor size for 850 kVA on a 120V Single-Phase AC circuit.

Line Current (0.85 PF)7083.33 AAt 1.0 PF: 7083.33 A
Active / Apparent Power722.5 kW850.0 kVA · 447.77 kVAR
Recommended Breaker8900 A (NEC)7100 A (IEC Nominal)
Recommended Copper Wire13× 1000 kcmil (Parallel)IEC Metric: 13× 400 mm²

Engineering Breakdown for 850 kVA at 120V

Input Rating850 kVA (120V Single-Phase AC)
Amperage at 0.85 Power Factor (Industrial Motor/Transformer)7083.33 Amps
Amperage at 1.00 Power Factor (Resistive Load)7083.33 Amps
Real Power (kW / Watts)722.5 kW (722,500 W)
Apparent Power (kVA) & Reactive Power (kVAR)850.0 kVA / 447.77 kVAR
Equivalent Mechanical Horsepower (HP)968.89 HP
NEC 125% Continuous Circuit Breaker8900 A
Minimum Copper Conductor (100 ft / 30 m, ≤3% Drop)13× 1000 kcmil (Parallel) (NEC) / 13× 400 mm² (IEC)

Frequently Asked Questions

How many amps is 850 kVA at 120V (1-Phase)?

At 120V Single-Phase AC, 850 kVA equals 7083.33 Amps at an industrial power factor of 0.85 (or 7083.33 Amps at unity power factor 1.0).

What size breaker and wire is needed for 850 kVA at 120V?

For 7083.33A continuous load, NEC requires a 125% rated breaker of 8900A with 13× 1000 kcmil (Parallel) copper conductors, while IEC standard sizing uses a 7100A breaker with 13× 400 mm² copper cable.