⚡ Cu ρ (75°C): 0.0214 Ω·mm²/m 🔌 NEC / IEC Standards: NFPA 70 & IEC 60364 🇺🇸 US Grid Avg: $0.175/kWh 🇩🇪 DE Grid Avg: €0.345/kWh 🇸🇪 SE Elpris: 1.54 SEK/kWh 🇳🇴 NO Strøm: 1.17 NOK/kWh 🔩 Copper Ref: $9,650/t (2026-10-25)
❄️ Heat Pump & HVAC Thermal Load · EN 12831 & ACCA Manual J Reference

Heat Pump Sizing for 186 m² (2,002 sq ft) — Australia & Mild APAC (Sydney/Melbourne/Tokyo)

Thermal heat loss calculation, recommended heat pump capacity (kW, BTU/h & HVAC Tons), SCOP efficiency, and annual electricity consumption.

Recommended Heat Pump13.2 kW45,040 BTU/h (3.75 Tons)
Annual Electricity Usage3,936 kWh/yrDelivers 17,710 kWh Heat (SCOP 4.5)
Savings vs Direct Electric13,774 kWh/yrSpecific Load: 68.0 W/m²
Electrical Circuit (230V)20 A BreakerPeak Compressor Input: 3.57 kW

Thermal & Electrical Specification Table (186 m² / 2,002 sq ft)

Heated Floor Area186 m² (2,002 sq ft)
Climate Zone & Design Outdoor TempAustralia & Mild APAC (Sydney/Melbourne/Tokyo)
Building Insulation EnvelopeOlder Uninsulated Building (85 W/m² Base) (68.0 W/m² Peak)
Peak Space Heating Load12.65 kW Thermal
Recommended Heat Pump Output (Incl. DHW)13.2 kW (45,040 BTU/h · 3.75 Tons)
Seasonal Coefficient of Performance (SCOP)4.5 (340%–450% Seasonal Efficiency)
Annual Heat Demand vs Electricity Consumed17,710 kWh Heat → 3,936 kWh Electricity

Frequently Asked Questions

What kW size heat pump do I need for a 186 m² (2002 sq ft) house?

For a 186 m² (2002 sq ft) building with Older Uninsulated Building (85 W/m² Base) in Australia & Mild APAC (Sydney/Melbourne/Tokyo), the peak space heating load is 12.65 kW (68.0 W/m²). Including domestic hot water allowance, a 13.2 kW (45,040 BTU/h / 3.75 Ton) heat pump is recommended.

How many kWh of electricity does a 13.2 kW heat pump use per year?

With a Seasonal Coefficient of Performance (SCOP) of 4.5 over 1400 full-load equivalent heating hours, the heat pump consumes approximately 3,936 kWh of electricity per year to deliver 17,710 kWh of heat — saving 13,774 kWh/year compared to direct electric radiators.