⚡ Cu ρ (75°C): 0.0214 Ω·mm²/m 🔌 NEC / IEC Standards: NFPA 70 & IEC 60364 🇺🇸 US Grid Avg: $0.175/kWh 🇩🇪 DE Grid Avg: €0.345/kWh 🇸🇪 SE Elpris: 1.54 SEK/kWh 🇳🇴 NO Strøm: 1.17 NOK/kWh 🔩 Copper Ref: $9,650/t (2026-10-25)
❄️ Heat Pump & HVAC Thermal Load · EN 12831 & ACCA Manual J Reference

Heat Pump Sizing for 572 m² (6,157 sq ft) — US Sunbelt & Mediterranean (TX/FL/CA/ES/IT)

Thermal heat loss calculation, recommended heat pump capacity (kW, BTU/h & HVAC Tons), SCOP efficiency, and annual electricity consumption.

Recommended Heat Pump41.9 kW142,969 BTU/h (11.91 Tons)
Annual Electricity Usage14,080 kWh/yrDelivers 61,950 kWh Heat (SCOP 4.4)
Savings vs Direct Electric47,870 kWh/yrSpecific Load: 72.2 W/m²
Electrical Circuit (230V)70 A BreakerPeak Compressor Input: 11.64 kW

Thermal & Electrical Specification Table (572 m² / 6,157 sq ft)

Heated Floor Area572 m² (6,157 sq ft)
Climate Zone & Design Outdoor TempUS Sunbelt & Mediterranean (TX/FL/CA/ES/IT)
Building Insulation EnvelopeOlder Uninsulated Building (85 W/m² Base) (72.2 W/m² Peak)
Peak Space Heating Load41.3 kW Thermal
Recommended Heat Pump Output (Incl. DHW)41.9 kW (142,969 BTU/h · 11.91 Tons)
Seasonal Coefficient of Performance (SCOP)4.4 (340%–450% Seasonal Efficiency)
Annual Heat Demand vs Electricity Consumed61,950 kWh Heat → 14,080 kWh Electricity

Frequently Asked Questions

What kW size heat pump do I need for a 572 m² (6157 sq ft) house?

For a 572 m² (6157 sq ft) building with Older Uninsulated Building (85 W/m² Base) in US Sunbelt & Mediterranean (TX/FL/CA/ES/IT), the peak space heating load is 41.3 kW (72.2 W/m²). Including domestic hot water allowance, a 41.9 kW (142,969 BTU/h / 11.91 Ton) heat pump is recommended.

How many kWh of electricity does a 41.9 kW heat pump use per year?

With a Seasonal Coefficient of Performance (SCOP) of 4.4 over 1500 full-load equivalent heating hours, the heat pump consumes approximately 14,080 kWh of electricity per year to deliver 61,950 kWh of heat — saving 47,870 kWh/year compared to direct electric radiators.